Skip to content

The Nikon A1R comprises a dual scanhead design, allowing the use of both the galvano and resonant scanners - offering the choice of extreme imaging speed, or high resolution.

With the Okolab environmental chamber and stage-top incubator, time lapse imaging of live samples is possible via temperature and air-mix control.

Extremely sensitive GaAsp detectors allow the imaging of the faintest signals and result in clear high resolution results.

Acquisition and analysis are carried out from the Nikon NIS-Elements C software, which takes you from image acquisition to paper-ready figures in a single session.

Contact us to discuss how this system can benefit your research.

Nikon A1R Confocal Microscope

View all Close all
Specifications
Nikon A1R confocal microscope (inverted) on Ti2 chassis.
Objectives
  • 10x CFI Plan Fluor DLL 0.3NA Ph1 WD:16mm

  • 20x CFI Plan Apochromat VC 0.75NA WD:1mm

  • 40x CFI S Plan Fluor ELWD WD:2.8-3.6mm with correction collar 0-2.0mm

  • 60x Oil CFI Apochromat Lambda S 1.4NA WD:0.14mm with chromatic correction 405-656nm

Laser lines
LU-N4 Solid state: 405, 488, 561, 633 (15mW)

 

Find a profileSearch by A-Z